Metrologic Instruments IS3480 Manual De Usuario

 

 

12 

S

CANNER

 

O

PERATION

  

 

Configurable Primary and Secondary Scan Pattern Modes 

 

 

There are two configurable scan pattern modes available with the IS3480. 

• The 

primary scan pattern mode is the default scan pattern active when the 

scanner starts.   

• The 

secondary scan pattern mode is activated by pressing the button 

located on the side of the scanner.  This mode is also referred to as the 
button mode.  For additional information on QuantumE’s button modes and 
an example of each, please refer to Configurable Button Functions below. 

 

The scanner returns to the primary scan pattern mode after a double 
click of the button or if the unit has not scanned a bar code for the 
duration of a pre-configured time limit. 

 
 

Each pattern mode can be configured to use one of three scan patterns listed 
below.  Please refer to the MetroSelect Configuration Guide for information on 
changing the default scan pattern settings. 

 

•  all scan lines on (omnidirectional reading) 
•  single-line (menu reading) 
•  horizontal raster  

 

If CodeGate is enabled, it will apply to the secondary pattern mode 
when scanning.  For detailed information on CodeGate and the button 
refer to the Configurable Button Functions. 

 
 
 
 

Configurable Button Functions 
 

The button on the side of the IS3480 can be configured to function in one of  
four modes. 

• Button 

Click Mode, with CodeGate Enabled (Default) 

• Button 

Click Mode, with CodeGate Disabled  

• Button 

Hold Mode, with CodeGate Enabled 

• Button 

Hold Mode, with CodeGate Disabled 

 

The following pages include examples of how the button will function when the 
unit has been configured to operate in each of the four button modes.