Konica Minolta C550 Manual De Usuario

Network Settings

C550

4-96

Specify SNMP settings. Settings can be specified for the following.

SNMP Setting screen 1/3

SNMP Setting screen 2/3

SNMP Setting screen 3/3

!

If an IP address or IPX address is specified with “Status Notification Set-
ting”, use the TRAP function with SNMP. Set “TRAP Setting” on the 
SNMP Setting screen to “Allow”.

For details on “Status Notification Setting”, refer to “Status Notification 
Setting” on page 4-125.

Touch [5 Network Setting] in the Administrator Settings screen.

–

For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 3-7.

Touch [8 SNMP Settings] in the Network Settings screen.

SNMP Setting screen 1/3 appears.

SNMP v1/v2c (IP)

Select whether or not SNMP v1/v2c (IP) is used.

SNMP v3 (IP)

Select whether or not SNMP v3 (IP) is used.

SNMP v1 (IPX)

Select whether or not SNMP v1 (IPX) is used.

UDP Port Number

Specify the UDP port number. To change the setting, press the [C] 
(clear) key, and then use the keypad to type in the desired port 
number. (Range: 1 to 65535)

SNMP v1/v2c Settings

Specify the settings when v1 or v2c is selected. For details, refer 
to “SNMP v1/v2c Settings” on page 4-98.

SNMP v3 Settings

Specify the settings when v3 is selected. For details, refer to 
“SNMP v3 Settings” on page 4-100.

Permission Settings

Select whether to permit or prohibit TRAP.

TRAP Setting When Au-
thentication Failed

Select whether or not to enable TRAP when authentication failed.