Burris LH 4 Manual De Usuario

 

4.  Rotate the control panel until it is aligned with the rack position of the 

NetServer, as shown in Figure 3-3. Be careful of the ribbon cable that 
connects the control panel to the NetServer. Be careful not to damage it. 

  

There are two possible positions for the reinstallation of the 
control panel, depending upon the rack in which the NetServer 
will reside. Refer to Figure 3-3. 

 

5.  Refer to Figure 3-3. Mount the control panel in the set of slots appropriate 

for your rack: 

◊ 

Slots for the HP rack are on the right. 

◊ 

Slots for the Compaq rack are on the left.