Fujitsu LT800P Manual De Usuario
38
S t y l i s t i c L T 8 0 0 P T a b l e t
2. Slide the spring-loaded battery release switch in the direction indicated in .
3. While holding the switch, slide the battery pack away from the top of the system,
as indicated in .
If you are using an external battery charger, refer to the instructions provided with the
battery charger.
battery charger.
To install the battery pack:
Orient the battery so the grooves on the sides of the battery align with the slides inside of
the battery tray. Slide the battery pack into the tray and press it firmly into the tray until
it is seated. When it is properly seated, the battery release switch will automatically latch
the battery pack into place.
the battery tray. Slide the battery pack into the tray and press it firmly into the tray until
it is seated. When it is properly seated, the battery release switch will automatically latch
the battery pack into place.
Once the battery pack is installed, you can resume system operation or start your system
and use the system normally.
and use the system normally.
Figure 2-2 Removing the Battery Pack
1
2
Battery release
switch
switch
Battery pack
1
2
58-0867-01.book Page 38 Thursday, February 13, 2003 1:18 PM