Fujitsu LT800P Manual De Usuario

4. Perform the following steps.

■

Click [Internet Protocol (TCP/IP)].

■

Click [Properties]. The [Internet Protocol (TCP/IP) Properties] window appears.

5. Set an IP address as indicated in Table 3. Ask your network administrator to check 

the setting.

Table A-3   Setting an IP Address

6. Click [OK]. The [Local Area Connection Properties] window appears again.

7. Click [OK]. When a message appears prompting you to restart the computer, click 

[Yes].

Checking the full computer name and workgroup

3

1. Click [Start] -> [Settings] -> [Control Panel].

2. Double-click the [System] icon. [System Properties] appears.

3. Click the [Network Identification] tab.

4. Check [Full computer name] and [Workgroup]. Ask your network administrator 

and check the setting.

For AdHoc 
Network

Set the IP address and subnet mask:

Click [Use the following IP address], and enter a value for [IP 
address] and [Subnet mask]. 

Refer to “Setting IP Addresses” on page 94 to set an IP address 
and subnet mask.

For Infrastructure 
Network

Select [Obtain an IP address automatically]:

For the DNS server, select [Obtain DNS server address 
automatically].

For the IP address, DNS server, and default gateway, follow the 
network administrator's instructions, if any.

58-0867-01.book  Page 75  Thursday, February 13, 2003  1:18 PM