Gateway ALR 8300 Manual De Usuario
System Access 7
Closing the system
Before closing the system, verify that all connectors and boards are
properly installed and firmly seated.
properly installed and firmly seated.
Reinstalling the bezel
You must replace the bezel before you replace the wrap-around panel and
the side panel.
the side panel.
1.
Position the bezel to the front of the chassis so that the bezel pegs are
aligned with the mounting holes on the front of the chassis. See
Figure 4.
aligned with the mounting holes on the front of the chassis. See
Figure 4.
Figure 4: Reinstalling the Bezel
To Replace the Bezel
4081TL.book Page 7 Tuesday, December 22, 1998 1:27 PM