Gateway ALR 8300 Manual De Usuario
14 Maintaining and Troubleshooting the Gateway ALR 8300 Server
AV
DIMM bank D
AW
Optional power connector
AX
Processor 1 fan connector
AY
Embedded VRM for processor 1
AZ
Optional VRM for processor 2
BA
Processor 2 fan connector
BB
Processor speed setting jumper
BC
RAID cage connector
BD
LED display connector
Chassis fans (A, F, S)
There are several chassis fan connectors on the system board. These
connectors provide power for cooling fans that may be positioned in several
parts of the chassis to provide cooling for critical components.
connectors provide power for cooling fans that may be positioned in several
parts of the chassis to provide cooling for critical components.
Power connectors
There are several power connectors on the system board. These connectors
are intended to allow the connection of different power supplies for
different system configurations. Some of these connectors are not used.
are intended to allow the connection of different power supplies for
different system configurations. Some of these connectors are not used.
Standard power connectors (B)
The power connectors provide all of the power to the system board. These
connectors are designed to accommodate the power supply installed in the
system.
connectors are designed to accommodate the power supply installed in the
system.
Soft power connector (C)
The soft power connector provides for a power switch that causes the
system to power up or power down from a standby state.
system to power up or power down from a standby state.
4081TL.book Page 14 Tuesday, December 22, 1998 1:27 PM