Gateway ALR 8300 Manual De Usuario

Descargar
Página de 128
26          Maintaining and Troubleshooting the Gateway ALR 8300 Server
Replacing the processor
The system is compatible with Intel Pentium
®
 II Xeon
 processors.
You can either upgrade the existing Pentium II Xeon processor or install a 
second processor of the same speed as the original processor. 
When replacing a processor, order a Pentium II Xeon processor upgrade kit. 
The kit includes the processor, a heat sink, and a disposable electrostatic 
discharge (ESD) wrist strap. For the latest details on the availability of the 
upgrade kits, contact one of the sources listed in the Assistance Resources 
document.
It is critical that a heat sink be installed on each processor. The Pentium II 
Xeon processor overheats and fails if it is not cooled sufficiently. The heat 
sink provided with the processor on the system provides all necessary 
cooling for the processor, as long as the system covers are on.
1.
Turn off the system and disconnect the power cord.
2.
Open the case, observing the ESD precautions in “Static electricity 
precautions” on page 2.
To Replace the Processor
 Important!
The system board provides 
an embedded voltage 
regulator module (VRM) to 
provide the correct voltage 
for the first processor. You 
do not need to install an 
additional or replacement 
VRM. If a VRM was 
included in your processor 
upgrade kit, do not use it.
4081TL.book  Page 26  Tuesday, December 22, 1998  1:27 PM