Black Box SW722A-R4 Manual De Usuario

Logs out the current user if an access password
has been set; video is blanked and keyboard and
mouse input is locked until a user enters the
access password. If no access password has
been set, turns on the screen saver.

[Ctrl] L

Log Out

Causes the ServSwitch to display its “computer
select window” (see Section 5.5).

[Ctrl] [ESC]

Activate Select
Window

Causes the ServSwitch to display its on-screen
overlay menus.

[Ctrl] [F12]

Activate On-
Screen Menus

Causes the ServSwitch to display the on-screen
computer label of the currently selected CPU for
the currently configured fadeout time (or for three
seconds if fadeout is disabled).

[Ctrl] D

Display Label

Causes the ServSwitch to report the version of
ROM it is using. Issue this command if you are
asked to do so by a technical-support person.

[Ctrl] I

Identify ROM

Causes the ServSwitch to send a null byte to the
CPU’s PS/2 mouse port. Issue this command to
correct the current CPU if it gets “out of sync” with
the PS/2 mouse (see Section 4.3.7).

[Ctrl] N

Send Null Byte

Resets and enables the keyboard and mouse.
Issue this command to correct your keyboard or
mouse if one of them malfunctions or gets stuck.

[Ctrl] R

Reset

Sets the time of inactivity, in seconds, after which
the ServSwitch will blank the shared monitor’s
screen. (The monitor is reactivated when the
mouse is moved or any key on the shared
keyboard is pressed.)

[Ctrl] Vxxx [Enter]

(xxx = delay in seconds)

Set Screen
Saver’s Delay
Time

Enter this command after you enter the Set
Screen-Saver Delay Time command (it saves the
new setting to nonvolatile memory):

[Ctrl] K

Keep Setting

Turns Scan mode OFF (the port being scanned at
the time the command is entered is given access
to the shared monitor, keyboard, and mouse).

Note: Scan can also be stopped by entering a

Select Port command.

[Ctrl] X

Scan OFF