Black Box SW628A-R2 Manual De Usuario
13
CHAPTER 2: Introduction
2.4 The Rear Panel
All cable connections are made at the ServSwitch Jr. MP’s rear panel, as illustrated
(in Figure 2-2) and described below.
(in Figure 2-2) and described below.
Figure 2-2. The rear panel of a 4-port ServSwitch Jr. MP (SW628A-R2).
Panel Label
Connector
Description
Ports 1, 2, 3, 4*
DB25 F
Connect the sharing computers to these ports with
special CPU Cables. At the Switch end, these cables
have a DB25 male connector; at the other ends,
they have appropriate connectors to plug into your
CPUs’ video, keyboard, and (on PC CPUs) mouse
ports. These cables take the signals that would
normally pass between the CPUs’ ports and the
monitor, keyboard, and mouse, and carry them
between the CPUs’ ports and the ServSwitch Jr. MP
instead.
special CPU Cables. At the Switch end, these cables
have a DB25 male connector; at the other ends,
they have appropriate connectors to plug into your
CPUs’ video, keyboard, and (on PC CPUs) mouse
ports. These cables take the signals that would
normally pass between the CPUs’ ports and the
monitor, keyboard, and mouse, and carry them
between the CPUs’ ports and the ServSwitch Jr. MP
instead.
* On the 2-port (SW627A-R2) model, port 1 is for the PC CPU, port 2 is for the Mac
CPU. On the 4-port (SW628A-R2) model, ports 1 and 2 are for the PC CPUs,
ports 3 and 4 are for the Mac CPUs.
(VGA
HD15 F
Attach the shared monitor’s video cable directly to
MONITOR)
this port.
(PS/2
6-pin mini-
Attach the shared PS/2 type (regular or wheel)
MOUSE)
DIN F
mouse directly to this port.
(PS/2
6-pin mini-
Attach the shared PS/2 type keyboard, attach it
KEYBOARD)
DIN F
directly to this port.
[None]
3.5-mm
Attach the power supply’s output cord to this jack.
barrel jack
1
3
2
4