Black Box SW628A-R2 Manual De Usuario
33
CHAPTER 4: Operation
4.3.13 S
ET
M
OUSE
T
RANSLATION
(PC CPU
S WITH
S
ERIAL
M
OUSE
P
ORTS
O
NLY
)
If each IBM PC CPU attached to your ServSwitch Jr. MP has a PS/2 mouse port,
you can plug a PS/2 mouse into the Switch and control them both without having
to reconfigure the system at all. However, if an attached PC CPU has an RS-232
serial mouse port, you’ll need to set the Switch to do PS/2 to RS-232 mouse
translation for the serial-mouse CPU. To enable mouse translation for a serial-
mouse CPU, select that CPU’s port, then type [CTRL] [Q] [1] [ENTER]. Enter
the Keep Settings command after you enter this command. If later you attach a
computer with a PS/2 mouse port to that CPU port on the Switch, type [CTRL]
[Q] [0] [ENTER] to disable mouse translation, then enter the Keep Settings
command.
you can plug a PS/2 mouse into the Switch and control them both without having
to reconfigure the system at all. However, if an attached PC CPU has an RS-232
serial mouse port, you’ll need to set the Switch to do PS/2 to RS-232 mouse
translation for the serial-mouse CPU. To enable mouse translation for a serial-
mouse CPU, select that CPU’s port, then type [CTRL] [Q] [1] [ENTER]. Enter
the Keep Settings command after you enter this command. If later you attach a
computer with a PS/2 mouse port to that CPU port on the Switch, type [CTRL]
[Q] [0] [ENTER] to disable mouse translation, then enter the Keep Settings
command.