Black Box PQ-8S Manual De Usuario

S/38, S/36

Laser printer (using 

3812

5219

HP PCL commands)

S/38, S/36

Matrix printer

4214

4214-2

(printing NLQ)

S/38, S/36,

Matrix printer

5224

5224 (2P)

(S/34)

S/38, S/36,

Specialty printer (e.g.

5256

5256

S/34

label printer)

Use the PQ-8’s configuration
switches to select the twinax address,
the output protocol, and to perform
the available test and diagnostic
functions. The PQ-8S has a second
bank of eight switches (referred to 
as SW2) to change the serial
parameters. Use a pointed object,
such as a ball-point pen, to change
the switch settings.

When operating, the PQ-8 will

only recognize EBCDIC Hex Dump
and ASCII Hex Dump settings. All
other settings are only read at power-
up. Whenever one of these settings is
changed, remember to cycle power
to activate them.

The PQ-8 can be configured
through its on-board configuration
switches, user-friendly PC setup
software, or by sending download
commands from the host or from a
PC/LAN. To ensure proper
functioning of the PQ-8, you should
review all available setup parameters.