Black Box LGB1126A Manual De Usuario
724-746-5500 | blackbox.com
Page 190
724-746-5500 | blackbox.com
Chapter 4: Security
- Disabled: The server is disabled.
- Not Ready: The server is enabled, but IP communication is not yet up and running.
- Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept accounting
attempts.
- Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within the configured timeout. The
server has temporarily been disabled, but will get reenabled when the dead-time expires. The number of seconds left before
this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled.
this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled.
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icon, upper right of screen (Refresh): Click to refresh the RADIUS Status information manually.
4.6.3 RADIUS Details
This section shows you a detailed statistics of the RADIUS Authentication and Accounting servers. The statistics map closely to
those specified in RFC4668 - RADIUS Authentication Client MIB.
those specified in RFC4668 - RADIUS Authentication Client MIB.
Web Interface
To configure a RADIUS Details Configuration in the Web interface:
1. Specify which port you want to check.
2. Check “Auto-refresh.”
Figure 4-20. The RADIUS Authentication Statistics for Server screen.
Parameter Description
• Auto-refresh: Check the auto-refresh box to set the unit to refresh information automatically.
• Icons, upper right of screen (Refresh, Clear): Click to refresh the RADIUS Statistics information manually; click Clear to clear
all new entries.
LGB1108A