SMC Networks 10/100 Manual De Usuario
C
ONFIGURING
THE
S
WITCH
2-100
Web - Click Rate Limit, Input/Output Rate Limit Port/Trunk
Configuration. Enable the Rate Limit Status for the required
interfaces, set the Rate Limit to one of the options shown in the
preceding table, and click Apply.
Configuration. Enable the Rate Limit Status for the required
interfaces, set the Rate Limit to one of the options shown in the
preceding table, and click Apply.
CLI - This example sets the rate limit for input and output traffic
passing through port 3 to approximately 3% (i.e., 3.12 Mbps for a
100 Mbps link), and the rate limit for traffic crossing port 4 to 6%
(i.e., 6.25 Mbps for a 100 Mbps link).
passing through port 3 to approximately 3% (i.e., 3.12 Mbps for a
100 Mbps link), and the rate limit for traffic crossing port 4 to 6%
(i.e., 6.25 Mbps for a 100 Mbps link).
Configuring 802.1x Port Authentication
Network switches can provide open and easy access to network
resources by simply attaching a client PC. Although this automatic
configuration and access is a desirable feature, it also allows
unauthorized personnel to easily intrude and possibly gain access
to sensitive network data.
resources by simply attaching a client PC. Although this automatic
configuration and access is a desirable feature, it also allows
unauthorized personnel to easily intrude and possibly gain access
to sensitive network data.
Console(config)#interface ethernet 1/3
Console(config-if)#rate-limit input percent 3
Console(config-if)#rate-limit output percent 3
Console(config-if)#exit
Console(config)#interface ethernet 1/4
Console(config-if)#rate-limit input percent 6
Console(config-if)#exit
Console(config)#interface ethernet 1/4
Console(config-if)#rate-limit input percent 6
Console(config-if)#rate-limit output percent 6
Console(config-if)#
Console(config-if)#