SMC Networks 10/100 Manual De Usuario
C
ONFIGURING
802.1
X
P
ORT
A
UTHENTICATION
2-105
Web – Select dot1x, dot1X Configuration. Enable dot1x globally for
the switch, modify any of the parameters required, and then click
Apply.
the switch, modify any of the parameters required, and then click
Apply.
CLI – This example enables re-authentication and sets all of the
global parameters for dot1x.
global parameters for dot1x.
Configuring a Port for Authorization
When dot1x is enabled, you need to specify the dot1x
authentication mode configured for each port.
authentication mode configured for each port.
Command Attributes
•
Status – Indicates if authentication is enabled or disabled on
the port.
the port.
Console(config)#dot1x max-req 5
Console(config)#dot1x re-authentication
Console(config)#dot1x timeout quiet-period 40
Console(config)#dot1x timeout re-auth 5
Console(config)#dot1x timeout tx-period 40
Console(config)#authentication dot1x default radius
Console(config)#