SMC Networks 10/100 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-62
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
ip igmp snooping query-count
Use this command to configure the query count. Use the no form
to restore the default.
to restore the default.
Syntax
ip igmp snooping query-count count
no ip igmp snooping query-count
no ip igmp snooping query-count
count - The maximum number of queries issued for which
there has been no response before the switch takes action
to drop a client from the multicast group. (Range: 2-10)
there has been no response before the switch takes action
to drop a client from the multicast group. (Range: 2-10)
Default Setting
2 times
Command Mode
Global Configuration
Command Usage
The query count defines how long the querier waits for a
response from a multicast client before taking action. If a
querier has sent a number of queries defined by this command,
but a client has not responded, a countdown timer is started
using the time defined by ip igmp snooping query-max-
response from a multicast client before taking action. If a
querier has sent a number of queries defined by this command,
but a client has not responded, a countdown timer is started
using the time defined by ip igmp snooping query-max-
Console(config)#ip igmp snooping
Console(config)#
Console(config)#