SMC Networks 10/100 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-70
login
Use this command to enable password checking at login. Use the
no form to disable password checking and allow connections
without a password.
no form to disable password checking and allow connections
without a password.
Syntax
login [local]
no login
no login
local - Selects local password checking. Authentication is
based on the user name specified with the username
command.
based on the user name specified with the username
command.
Default Setting
login local
Command Mode
Line Configuration
Command Usage
• There are three authentication modes provided by the switch
itself at login:
- login selects authentication by a single global password as
specified by the password line configuration command.
When using this method, the management interface starts in
Normal Exec (NE) mode.
When using this method, the management interface starts in
Normal Exec (NE) mode.
- login local selects authentication via the user name and
password specified by the username command (i.e., default
setting). When using this method, the management interface
starts in Normal Exec (NE) or Privileged Exec (PE) mode,
depending on the user’s privilege level (0 or 15 respectively).
setting). When using this method, the management interface
starts in Normal Exec (NE) or Privileged Exec (PE) mode,
depending on the user’s privilege level (0 or 15 respectively).
- no login selects no authentication. When using this method,
the management interface starts in Normal Exec (NE) mode.