SMC Networks 10/100 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-78
stopbits
Use this command to set the number of the stop bits transmitted
per byte. Use the no form to restore the default setting.
per byte. Use the no form to restore the default setting.
Syntax
stopbits {1 | 2}
• 1 - One stop bit
• 2 - Two stop bits
Default Setting
1 stop bit
Command Mode
Line Configuration
Example
To specify 2 stop bits, enter this command:
show line
Use this command to display the terminal line's parameters.
Syntax
show line [console | vty]
• console - Console terminal line.
• vty - Virtual terminal for remote console access.
Default Setting
Shows all lines
Command Mode
Normal Exec, Privileged Exec
Console(config-line)#stopbits 2
Console(config-line)#
Console(config-line)#