SMC Networks 10/100 Manual De Usuario

Descargar
Página de 318
IP C
OMMANDS
3-85
Command Mode 
Normal Exec, Privileged Exec
Command Usage 
• Use the ping command to see if another site on the network 
can be reached. 
• Following are some results of the ping command: 
Normal response -The normal response occurs in one to ten 
seconds, depending on network traffic. 
Destination does not respond - If the host does not respond, 
a “no answer from host” appears in ten seconds. 
Destination unreachable - The gateway for this destination 
indicates that the destination is unreachable. 
Network or host unreachable - The gateway found no 
corresponding entry in the route table. 
• Press <Esc> to stop pinging.
Example 
Related Commands 
Console#ping 10.1.0.9
Type ESC to abort.
PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5
seconds
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 0 ms
Ping statistics for 10.1.0.9:
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
Approximate round trip times:
Minimum = 0 ms, Maximum = 10 ms, Average = 8 ms
Console#