SMC Networks 10/100 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-94
Command Usage
When auto-negotiation is enabled with the negotiation
command, the switch will negotiate the best settings for a link
based on the capabilites command. When auto-negotiation is
disabled, you must manually specify the link attributes with the
speed-duplex and flowcontrol commands.
command, the switch will negotiate the best settings for a link
based on the capabilites command. When auto-negotiation is
disabled, you must manually specify the link attributes with the
speed-duplex and flowcontrol commands.
Example
The following example configures Ethernet port 5 capabilities to
100half, 100full and flow control.
100half, 100full and flow control.
Related Commands
flowcontrol
Use this command to enable flow control. Use the no form to
disable flow control.
disable flow control.
Syntax
flowcontrol
no flowcontrol
no flowcontrol
Default Setting
Flow control enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#interface ethernet 1/5
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#
Console(config-if)#capabilities 100half
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#