SMC Networks 10/100 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
3-142
Example
garp timer
Use this command to set the values for the join, leave and leaveall
timers. Use the no form to restore the timers' default values.
timers. Use the no form to restore the timers' default values.
Syntax
garp timer {join | leave | leaveall} timer_value
no garp timer {join | leave | leaveall}
no garp timer {join | leave | leaveall}
• {join | leave | leaveall} - Which timer to set.
• timer_value - Value of timer.
• timer_value - Value of timer.
Ranges:
join: 20-1000 centiseconds
leave: 60-3000 centiseconds
leaveall: 500-18000 centiseconds
join: 20-1000 centiseconds
leave: 60-3000 centiseconds
leaveall: 500-18000 centiseconds
Default Setting
• join: 20 centiseconds
• leave: 60 centiseconds
• leaveall: 1000 centiseconds
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• Group Address Registration Protocol is used by GVRP and
GMRP to register or deregister client attributes for client
services within a bridged LAN. The default values for the GARP
timers are independent of the media access method or data
rate. These values should not be changed unless you are
services within a bridged LAN. The default values for the GARP
timers are independent of the media access method or data
rate. These values should not be changed unless you are
Console#show gvrp configuration ethernet 1/7
Eth 1/ 7:
Eth 1/ 7:
Gvrp configuration: Disabled
Console#