GarrettCom Magnum 6K32T Manual De Usuario

Magnum 6K32 & 6K32T Managed Switch                 Installation and User Guide (12/05) 

 

43 

.

.

 

 

1                                          5 

 

 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and  

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 

10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps. 

 

 

The 6KP6-RJ10ST is a six port combo module that looks similar to 

the 100Mb combo module with the exception of 10Mb speed at the ST fiber module.  
The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network 
segments. When installed in a Magnum 6K32T Managed Switch, the copper port 
supports the standard distance 100m on each port and the fiber port supports fiber optic 
cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-
duplex and half-duplex. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and  
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 
10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps. 

The Magnum 6KP4-F10ST 

is a 10Mb multi-mode 

fiber module with 4 ST-

Fiber ports. All four fiber 

ports are ST connectors 

and configured as 10Mb 

Half-duplex by default. 

The 10Mb ST-fiber ports 

allow the user to connect 

their legacy 10Mb network 

to the Magnum 6K32T 

switch. They also provide a convenient way for the half duplex  

hub to connect to the switch through 10Mb fiber ports. It supports distances according to 

the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km 

distance may be available as a special order).