GarrettCom Magnum 6K32T Manual De Usuario

Magnum 6K32 & 6K32T Managed Switch                 Installation and User Guide (12/05) 

 

50 

.

.

ACT

F/H

ACT

F/H

 

Link (LK) LED that indicates proper connectivity with the remote device when lit, a 

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off), and a 

“10/100” LED indicating 100Mb when lit (or 10 Mbps when off). 

Important Note:  The 10/100 RJ-45 ports are supported with Auto-negotiation and 
Auto-crossover (MDIX), which allow the RJ-45 ports to automatically Link with any RJ-
45 device and eliminate the use of cross-over cable.  

The RJ-45 pins normally (TP crossover switch) are per the standard for hubs-to-
users twisted pair wiring: 1 = receive+, 2 = receive-, 3 = transmit+, 6 = transmit-, 
other pins not used.  When the TP crossover push-button is UP, the pins of the RJ-
45 port are per the standard for up-links using twisted pair wiring, i.e., the transmit 
and the receive pairs are exchanged: 1 = transmit+, 2 = transmit-, 3 = receive+, 6 = 
receive-, other pins not used.  

 
5.2.10  6KP8-45-2MT, 6@ 10/100Mbps RJ-45 and 2@100Mb multi-mode 
FX , MTRJ Small-Form-Factor 

The Magnum 6KP8-

45-2MT eight port Module is a 
combo module with copper and 
fiber (Small Form Factor) 
MTRJ type ports. The small 
sizes of MTRJ connectors give 
an advantage of placing more 
fiber ports on one module. The 
6KP8-45-2MT is equipped with 
six 10/100 RJ-45 ports and two 
100Mb MTRJ fiber ports. 
When installed in a Magnum 
6K32T Switch, it supports the 
standard distances as mentioned on 5.2.3. and the LEDs also act similarly.  

The Magnum 6KP8-

45SLC eight port Module is a combo 

module with copper and fiber (Small 

Form Factor) LC type fiber ports.  

The small size of  LC connectors 

give an advantage of placing more 

ports on one module. The 6KP8-45-

 

ACT

F/

ACT

F/