GarrettCom Magnum 3000 Manual De Usuario

Magnum 3000 Stackable Hubs                                   Installation and User Guide (07/06)

 

 

.

.

This chapter describes each Port Module (PM), including appearance, 

functionality, and status displays. 

This section applies only to PMs shipped as separate items, i.e., only to PMs 

not factory installed in a Magnum 3000 Stackable Hubs bonus port slot. 

 

Examine the shipping container for obvious damage prior to installing a PM;  

notify the carrier of any damage which you believe occurred during shipment or delivery.  

Inspect the contents of this package for any signs of damage and ensure that the items 

listed below are included. 

 

This package should contain: 

One or more PMs. 

 

Remove the PM(s) from the shipping container.  Be sure to keep the shipping 

container should you need to ship any of the PMs separately at a later date.  

 

In the event there are items missing or damaged contact your supplier.  If you 

need to return the unit, use the original shipping container if possible.  Refer to Chapter 5 

for specific return procedures. 

 

An important feature of the Magnum 3000 Stackable Hubs is the use of 

individual Port Modules (PMs) for flexible mixed-media connectivity.  The Magnum 

PMs are compact interface cards designed to support every standard Ethernet media type.  

Each PM provides one port for connecting one Ethernet segment with its individual 

connector type and media.  There are a total of six Repeater Port Module (RPM) cards, 

plus a face plate. They are: 

RPM-BNC, RPM-AUI, RPM-DTE  RPM-FST (or FSC), RPM-SMF, RPM-TP  

There are also four different Bridge Port Module (BPM) cards.  They are: 

 BPM-FST 

Each PM is individually described as follows.