GarrettCom Magnum 3000 Manual De Usuario

Magnum 3000 Stackable Hubs                                   Installation and User Guide (07/06)

 

 

.

.

extensions data are in this firmware. The firmware in the EPROMs performs the data 

collection and execution functions, and operates as the local controller and interface to 

the network manager. 

 

 

The Magnum 3000 SNMP Agent Box operates the same as the embedded 

board agent.  It is packaged as a separate unit, enclosed in a box that is the same 

dimensions as a 3024 or 3012 so that it fits neatly into a Magnum 3000 stack.  It is a 

complete modular unit with its own internal auto-ranging power supply. 

 

 

 

The Magnum 3000-AGT agent box is connected into a stack by the Inter- 

Repeater Bus (IRB).  There are two IRB connectors at the right-rear, permitting the agent 

box unit to  be installed at the bottom or top of a stack using one IRB connector, or to be 

inserted into the middle of a stack using two IRB connectors. The IRB cable connectors 

are made with "notches / keys" to insure a proper connection.  

 

 

 

The agent logically resides on the IRB and will not be visible to network 

management software packages as a separate port or user.  For network integrity, the 

agent is designed so that it cannot be disconnected by network managers accidentally or 

purposefully.  Similarly, the agent operates in the stack attached to the IRB and does not 

need to use a port in any attached Magnum 3000 unit to be connected. 

 

P1:  Also used to setup IP addresses and
configuration files for complex networks.

P1:  Remote Terminal

RS-232 Port