GarrettCom Magnum 3000 Manual De Usuario

Magnum 3000 Stackable Hubs                                   Installation and User Guide (07/06)

 

 

.

.

Used to set the community string for GET and SET operations. 

# -- number of community. (Up to 10 different communities may be set) 
S -- allow SET operations. (If you do not "S" this command, this community will allow 
 

only GET operations) 

MANAGER -- the network manager IP addresses list, up to 10. (If  the manager IP 
 

addresses list is not present in a command line, any network manager can 

 

communicate with this agent using this community string) 

 
Example of two managers: >C 3 MAGNUM S 45.9.0.122 45.9.1.3{Cr} 
 
To display community, type: C{Cr} 
To delete community, type: C [#] {Cr} 
 
3. DISPLAY 
To display the whole configuration file, type: D{Cr} 
 
Example: >D{Cr} (  All configuration information will appear ) 
 
4. EXIT 
To exit from the configuration menu, type E{Cr} 
 
Example: >E{Cr} 
 
5. GATEWAY 
G[ATEWAY] [# [IP [SUBNETIP [MASKIP]]]]{Cr} 
 Used to set the gateway IP address and mask. Up to 10  gateways may be set. 
 
Example: >G 3 45.9.0.112 255.255.255.0 255.0.0.0{Cr} 
 
6. MANAGER 
M[ANAGER] [# [IP/NAME [PORT] COMMUNITY]]]  

Used to set the number of network manager IP addresses, and the community to which 

TRAPS should be sent.  Up to 10  managers may be set.  If "PORT" is absent, then 

TRAPS are sent to port 162, as specified in RFC 1157.  If "COMMUNITY" is absent, the 

community string "public" is used by default. 

Example: M  2  45.9.1.125  Magnum{Cr}    
 
7. SUBNETMASK 
S[UBNETMASK] [IP]{Cr} 

To set IP mask, type: S [ mask value] {Cr} 

 
Example: >S 255.255.255.0 {Cr}