3com 4210 Manual De Usuario
Configuring Anycast RP Application
163
After the peering relationship is established, the multicast receiver can receive
multicast data from the source.
multicast data from the source.
# View the PIM routing information on Switch C again.
[Switch C] display pim routing-table
PIM-SM Routing Table
Total 1 (S,G) entries, 0 (*,G) entry, 0 (*,*,RP) entry
(10.110.5.100, 225.1.1.1)
Protocol 0x20: PIMSM, Flag 0x80004: SPT
Uptime: 00:00:55, Timeout in 208 sec
Upstream interface: Vlan-interface1, RPF neighbor: NULL
Downstream interface list:
Vlan-interface2, Protocol 0x200: SPT, timeout in 200 sec
Matched 1 (S,G) entries, 0 (*,G) entry, 0 (*,*,RP) entry
# View the PIM routing information on Switch F again.
[SwitchF] display pim routing-table
PIM-SM Routing Table
Total 1 (S,G) entry, 3 (*,G) entries, 0 (*,*,RP) entry
(*, 224.1.1.1), RP 10.1.1.1
Protocol 0x20: PIMSM, Flag 0x2003: RPT WC NULL_IIF
Uptime: 00:25:26, never timeout
Upstream interface: Null, RPF neighbor: 0.0.0.0
Downstream interface list:
Vlan-interface2, Protocol 0x1: IGMP, never timeout
(192.168.3.1, 224.1.1.1)
Protocol 0x20: PIMSM, Flag 0x4: SPT
Uptime: 00:02:56, Timeout in 202 sec
Upstream interface: Vlan-interface1, RPF neighbor: 192.168.1.1
Downstream interface list:
Vlan-interface2, Protocol 0x1: IGMP, never timeout
Matched 1 (S,G) entry, 3 (*,G) entries, 0 (*,*,RP) entry
Complete Configuration
Configuration on Switch C
#
multicast routing-enable
#
interface Vlan-interface100
ip address 10.110.1.1 255.255.255.0.
pim sm
#
interface Vlan-interface101
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface Vlan-interface103
ip address 10.110.1.1 255.255.255.0
pim sm
#
interface LoopBack1