DeWALT 1 Manual De Usuario

This chapter provides step-by-step procedures for setting up BBSM Hotspot. After you complete the 
procedures in this chapter, your BBSM Hotspot server should be fully operational. 

The following two chapters, 

 and 

, provide more detailed information and advanced options for configuring and using BBSM 

Hotspot. 

Read the 

 section, then follow the step-by-step procedures to set up your BBSM 

Hotspot.

This section describes the prerequisites that you need to complete or check before setting up the 
software. After running the Setup Wizard in this chapter, you perform all operations from the Dashboard.

Before you configure BBSM, make sure that you complete the following tasks:

First, read the ReadMeFirst web page, which launches the first time you start your BBSM Hotspot 
server.

Then, read the first chapter to this guide, and the cautions below to avoid costly problems.

From your BBSM Hotspot server desktop, open the BBSM Hotspot Configuration Requirements 
Checklist and complete it to make sure that you have all of the networking information you need to 
configure your server.

Assemble the BBSM Hotspot server using the instructions in the Cisco BBSM Hotspot Hardware 
Assembly Guide. For information on obtaining this guide and other Cisco documentation, refer to 
the 

 section in the preface to this user guide.

If you will be using secured (https) pages, obtain and install a Certificate Authority (third-party 
SSL). (Refer to