Cisco Systems 12006 Manual De Usuario

This section describes how to configure the router. It includes information on the 
following topics:

During the first-time startup of an unconfigured router, the system automatically 
starts the setup command utility and begins displaying the interactive System 
Configuration Dialog on the system console screen. The System Configuration 
Dialog guides you through the configuration process with prompts for global 
(system-wide) parameters and interface (line card) parameters.

The System Configuration Dialog prompts and the order in which they appear on 
the screen vary depending on the platform, interfaces installed, router, and the 
Cisco IOS software image the router is running.

Let the entire System Configuration Dialogue script run, until you come to the 
item that you want to change. To accept default settings for items that you do not 
want to change, press the console keyboard Return key. To return to the 
privileged EXEC prompt without making changes, press Ctrl-C. To access help 
text in the setup command utility, press the question mark key (?) at any prompt.

When you complete your changes, the setup command utility displays the 
configuration command script that was created as a result of the changes entered 
during the setup session. It also queries if you want to use this configuration. If 
you answer Yes, the configuration is saved to NVRAM. If you answer No, the 
configuration is not saved and the process begins again. There is no default for 
this prompt; you must answer either Yes or No.

The 

, shows a 

setup session automatically invoked during the first-time startup of the router. 
During first-time startup, the system displays the system banner information, then 
starts the System Configuration Dialog.