Cisco Systems 1503 Manual De Usuario
Command Summary
Cisco Micro Hub User Guide
3-22
TFTP Download Commands
Use the commands in this section to configure how the hub downloads firmware from a
TFTP server. Use a server that has been configured to provide the firmware for your hub.
TFTP server. Use a server that has been configured to provide the firmware for your hub.
show tftp-download information
tftp-download
Syntax:
show tftp-download information
Mode:
Guest
Description:
Displays download information for TFTP, including the TFTP server address
and firmware filename, for example:
and firmware filename, for example:
Hub> show tftp-download info
ServerIP: 10.10.10.1
Filename: 1503R01.bin
Syntax:
tftp-download {server-ip-address} [filename]
Mode:
Administrator
Description:
Sets the IP address of the TFTP server that supports the hub.
Command Keyword Definitions
• server-ip-address—IP address of the server where the firmware file is stored.
Should be in the format xxx.xxx.xxx.xxx, where xxx is a value between 0
and 255.
The default value for this field is 255.255.255.255. The default value will
work only if the TFTP server is not on the same local network segment as the
hub.
and 255.
The default value for this field is 255.255.255.255. The default value will
work only if the TFTP server is not on the same local network segment as the
hub.
• filename—Filename of the firmware file. The filename is case sensitive and
contains between 1 and 28 alphanumeric characters. The default file name
for firmware c1500.bin. You can use different names for hub firmware files
but the file name must end in .bin.
for firmware c1500.bin. You can use different names for hub firmware files
but the file name must end in .bin.