3com S200 Manual De Usuario
Voice Over IP
15
T0008-48/B
Revision 5.2
Configuring VoIP
Route Selection Table Parameters
Parameters
These Route Selection Table parameters should be configured:
Note
A table boot is required for changes to these parameters to take affect.
Entry Number
Range
1 to 16
Default
1
Description
Specifies the number used to reference this table record.
Address
Range
0 to 15 digits
Default
blank
Description
Specifies the network address for calls routed beyond this node.
Destination #1
Range
0 to 32 alphanumeric characters. Use space to blank the field.
Default
blank
Description
Specifies the destination to which calls are routed. Enter SoTCP.