SMC Networks SMC6752AL2 Manual De Usuario

4-97

• You can specify three authentication methods in a single command to 

indicate the authentication sequence. For example, if you enter 
“authentication enable radius tacacs local,” the user name and 
password on the RADIUS server is verified first. If the RADIUS 
server is not available, then authentication is attempted on the 
TACACS+ server. If the TACACS+ server is not available, the local 
user name and password is checked.

enable password -  sets the password for changing command modes (4-36)

Remote Authentication Dial-in User Service (RADIUS) is a logon 
authentication protocol that uses software running on a central server to 
control access to RADIUS-aware devices on the network. An 
authentication server contains a database of multiple user name/password 
pairs with associated privilege levels for each user or group that require 
management access to a switch.

Console(config)#authentication enable radius
Console(config)#

radius-server host

Specifies the RADIUS server

GC

radius-server port 

Sets the RADIUS server network port 

GC

radius-server key 

Sets the RADIUS encryption key 

GC

radius-server 
retransmit 

Sets the number of retries 

GC

radius-server timeout  Sets the interval between sending 

authentication requests

GC

show radius-server

Shows the current RADIUS settings

PE