SMC Networks SMC6752AL2 Manual De Usuario

4-119

This command adds an IP access list and enters configuration mode for 
standard or extended IP ACLs. Use the no form to remove the specified 
ACL.

[no] access-list ip {standard | extended} acl_name

• standard – Specifies an ACL that filters packets based on the 

source IP address.

• extended – Specifies an ACL that filters packets based on the 

source or destination IP address, and other more specific criteria.

• acl_name – Name of the ACL. (Maximum length: 16 characters)

None

Global Configuration

show ip 
access-list 

Displays the rules for configured IP ACLs

PE

ip 
access-group 

Adds a port to an IP ACL

IC

show ip 
access-group

Shows port assignments for IP ACLs

PE

map access-list 
ip

Sets the CoS value and corresponding output 
queue for packets matching an ACL rule

IC

show map 
access-list ip 

Shows CoS value mapped to an access list for 
an interface

PE

Table 4-34  IP ACLs  (Continued)