SMC Networks SMC6752AL2 Manual De Usuario

4-168

Example
The following shows LACP enabled on ports 11-13. Because LACP has 
also been enabled on the ports at the other end of the links, the show 
interfaces status port-channel 1 command shows that Trunk 1 has been 
established.

Console(config)#interface ethernet 1/11
Console(config-if)#lacp
Console(config-if)#exit
Console(config)#interface ethernet 1/12
Console(config-if)#lacp
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#lacp
Console(config-if)#exit
Console(config)#exit
Console#show interfaces status port-channel 1
Information of Trunk 1
 Basic information:
  Port type:              100TX
  Mac address:            00-00-e8-00-00-0b
 Configuration:
  Name:
  Port admin:             Up
  Speed-duplex:           Auto
  Capabilities:           10half, 10full, 100half, 100full
  Flow control status:    Disabled
  Port security:          Disabled
  Max MAC count:          0
 Current status:
  Created by:             LACP
  Link status:            Up
  Operation speed-duplex: 100full
  Flow control type:      None
  Member Ports: Eth1/11, Eth1/12, Eth1/13,
Console#