SMC Networks SMC6752AL2 Manual De Usuario

2-10

The default strings are:

•

public - with read-only access. Authorized management stations are 
only able to retrieve MIB objects. 

•

private - with read-write access. Authorized management stations are 
able to both retrieve and modify MIB objects. 

Note: If you do not intend to utilize SNMP, we recommend that you 

delete both of the default community strings. If there are no 
community strings, then SNMP management access to the switch 
is disabled.

To prevent unauthorized access to the switch via SNMP, it is 
recommended that you change the default community strings.

To configure a community string, complete the following steps:

1. From the Privileged Exec level global configuration mode prompt, 

type “snmp-server community string mode,” where “string” is the 
community access string and “mode” is rw (read/write) or ro (read 
only). Press <Enter>. (Note that the default mode is read only.)

2. To remove an existing string, simply type “no snmp-server community 

string,” where “string” is the community access string to remove. Press 
<Enter>.

You can also specify SNMP stations that are to receive traps from the 
switch. To configure a trap receiver, complete the following steps:

1. From the Privileged Exec level global configuration mode prompt, 

type “snmp-server host host-address community-string,” where 
“host-address” is the IP address for the trap receiver and 

Console(config)#snmp-server community admin rw
Console(config)#snmp-server community private
Console(config)#