Cisco Systems OL-6380-01 Manual De Usuario
5-3
Cisco Catalyst Switch Manager User Guide
OL-6380-01
Chapter 5 Network Element Management
Network Element Management Window
Layer 2 Configuration
The Layer 2 Configuration area provides:
•
CDP—Displays the Cisco Discovery Protocol (CDP) global status on the
network element, enabled or disabled.
network element, enabled or disabled.
•
UDLP—Displays the UniDirectional Link Detection Protocol (UDLP) global
status on the network element: enabled, aggressive, or disabled. The
“aggressive” option is not applicable for CatOS.
status on the network element: enabled, aggressive, or disabled. The
“aggressive” option is not applicable for CatOS.
•
802.1x—Displays the 802.1x Port Based Authentication global status on the
network element, enabled or disabled.
network element, enabled or disabled.
Note
Dot1x cannot be enabled if dynamic mode is enabled on one or more
ports.
ports.
Layer 3 Configuration
The Layer 3 Configuration area provides:
•
IP CEF—Displays the status of the IP CEF routing on the network element,
enabled or disabled. This feature cannot be disabled on Cisco 3950, 4000,
4500, 6000, 6500, and 7600 series devices.
enabled or disabled. This feature cannot be disabled on Cisco 3950, 4000,
4500, 6000, 6500, and 7600 series devices.
•
IP Multicast—Displays the status of the IP Multicast routing on the network
element, enabled or disabled.
element, enabled or disabled.
Network Element Management Window
The Network Element Management window provides monitoring and
management information for properties related to the . These properties include
the Telnet and Enable passwords, global performance logging, and SNMP
properties for the entire switch.
management information for properties related to the . These properties include
the Telnet and Enable passwords, global performance logging, and SNMP
properties for the entire switch.