Cisco Systems SFS 7000D Manual De Usuario

Voltage is present on the backplane when the system is operating. To reduce risk of an electric shock, 
keep hands and fingers out of the power supply bays and backplane areas. Statement 166

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the 
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection 
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260. 
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The 
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2) 
while the housing is open, or both. Statement 1043

This product requires short-circuit (overcurrent) protection, to be provided as part of the building 
installation. Install only in accordance with national and local wiring regulations. Statement 1045

Class 1M laser radiation when open. Do not view directly with optical instruments. Statement 1053

Use of controls, adjustments, or performing procedures other than those specified may result in 
hazardous radiation exposure. Statement 1057

Before attempting any installation, read 

To safely and successfully prepare the environment for your Cisco SFS 7000P and SFS 7000D Server 
Switches, you need to do the following:

Check the contents of the switch package—For more information, see the parts list in the installation 
and configuration note that shipped with your switch.

Always use an approved ESD-preventative ankle or wrist strap.

Make sure you have the correct cables and sufficient ventilation.

Prepare a management workstation, such as a PC running a terminal program, with the cable and 
adapter required for your specific configuration.