Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco Systems
  4. SFS 7000D
  5. Manual De Usuario

Cisco Systems SFS 7000D Manual De Usuario

Descargar
Página de 80
 
6-7
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
OL-10853-01
Chapter 6      Hardware Diagnostic Tests
Running Power Supply Tests
Running a LED Test on the Power Supply
You can use the LED test to identify a specific power supply by entering these commands:
SFS-7000P> enable
SFS-7000P# config 
SFS-7000P(config)# diag power-supply 1
SFS-7000P(config-diag-power-supply-1)# test led
SFS-7000P(config-diag-power-supply-1)# start
SFS-7000P(config-diag-power-supply-1)# stop
SFS-7000P(config-diag-power-supply-1)#
Running a Self-Test on a Power Supply
To perform a diagnostic self-test on a power supply, follow these steps:
Step 1
Determine the ID of the power supply that you want to diagnose, if you do not already know the number. 
Enter the show power-supply command. 
SFS-7000P# show power-supply
=====================================================================
                            Power-supply Information
=====================================================================
ps    type    admin-status  oper-status   utilization   voltage
---------------------------------------------------------------------
1     AC      up            up            n/a           48
2     AC      up            up            15            47
Step 2
Specify the type of test (self-test is chosen by default) by entering the diag power-supply id command.
SFS-7000P> enable
SFS-7000P# config
SFS-7000P(config)# diag power-supply 2
SFS-7000P(config-diag-power-supply-2)# test self-test
Step 3
Start the test.
SFS-7000P(config-diag-power-supply-2)# start
Step 4
Display the progress of the test by entering the show diag fan command.
SFS-7000P(config-diag-power-supply-2)# exit
SFS-7000P(config)# exit
SFS-7000P# show diagnostic power-supply
======================================================================
                       Diagnostic Tests For Power Supply
======================================================================
              module-type : power-supply
            module-number : 2
                     test : self-test
               iterations : 1
                   action : start
                   result : success
     percentage-completed : 100
            result-string : Power Supply Self Test Completed, Final report : Passed=1, 
Failed=0, Total=1
Step 5
Display any errors that appear in the result string by entering the show diag fru-error command.
SFS-7000P# show diag fru-error