Cabletron Systems 9F120-08 Manual De Usuario
9
9F120-08 / 9F122-12 / 9F125-08 Module Specific Information
Module Specific Configuration Screen
In the FNB Resource Configuration Screen, you determine which of the two FNB
rings contains the MAC. The
rings contains the MAC. The
9F120 MicroLAN
Module Specific Configuration
Screen allows you to assign one of the two FNB rings (either the ring that contains
the MAC or the ring that does not contain the MAC) to each of the module’s M-
ports. The default ring that is assigned to each of the module’s M-ports is the ring
that contains the MAC.
the MAC or the ring that does not contain the MAC) to each of the module’s M-
ports. The default ring that is assigned to each of the module’s M-ports is the ring
that contains the MAC.
Figure 1. 9F120 MicroLAN Module Specific Statistics Screen
To assign an FNB ring to a module’s M-port:
1. Use the arrow keys to highlight the
PATH
field next to the desired port.
2. Press the
SPACE BAR
to toggle to the desired ring (either MAC-1 or No
MAC).
3. Press the
Return
key. Repeat
steps 1-3
to assign an FNB ring to other M-ports.
4. Use the arrow keys to highlight
SAVE
at the bottom of the screen and press
the
Return
key. When the message “SAVED OK” appears, the edits you have
made are saved. If you exit without saving, the message “NOT SAVED --
PRESS SAVE TO KEEP CHANGES” appears. If you proceed to exit without
saving, your edits will be lost.
PRESS SAVE TO KEEP CHANGES” appears. If you proceed to exit without
saving, your edits will be lost.
5. Use the arrow keys to highlight
RETURN
and press the
Return
key.
SmartSwitch 9000 LOCAL MANAGEMENT
Module Specific Configuration
Module Name: 9F120-08 Firmware Revision: 01.01.01
Slot Number: 12 BOOTPROM Revision: 00.00.04
FNB 1 Pri. (MAC) Ins. , FNB 2 Pri. (No MAC) Ins.
PORT# PATH CONNECT STATE
1 [MAC-1] CON
2 [MAC-1] CON
3 [MAC-1] CON
4 [MAC-1] CON
5 [MAC-1] CON
6 [MAC-1] CON
7 [MAC-1] CON
8 [MAC-1] CON
SAVE RETURN