Toshiba PSAGEX Manual De Usuario
4 Replacement Procedures
4.2 HDD
4. Remove the HDD pack by pulling on the tab attached to the pack, following the
direction of the arrows.
direction of the arrows.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble
or replace the HDD pack only if it fails.
or replace the HDD pack only if it fails.
5. Place the HDD pack on a flat surface (such as a desk), and remove the four M3x3.5
black flat head screws.
6. Place the HDD pack on a flat surface (such as a desk), and remove the chassis.
M3x
black flat head screw
-
3.5
Second HDD chassis
Second HDD
M2x3 black flat head screw
-
M3x
black flat head screw
-
3.5
Figure 4-11 Removing the HDD chassis
CAUTION: Do not apply pressure to the top or bottom of the drive.
4-18
Satellite M200/M205 / Satellite Pro M200/ EQUIUM M200/ SATEGO M200
Maintenance Manual