Panasonic FZG1AABACRM Manual De Usuario

12

For the purpose of recycling to facilitate effective utilization of resources, please return 

this product to a nearby authorized collection center, registered dismantler or recycler, 

or Panasonic service center when disposing of this product.

Please see the Panasonic website for further information on collection centers, etc.

http://www.panasonic.co.in/wps/portal/home

68-M-1

This appliance is supplied with a molded three pin mains plug for your safety and convenience.

A 3 ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3 

ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark 

A S A

 or the BSI mark   on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A re-

placement fuse cover can be purchased from your local dealer.

If the fitted molded plug is unsuitable for the socket outlet in your home then the fuse should be 

removed and the plug cut off and disposed of safely.

There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampere socket.
How to replace the fuse

The location of the fuse differs according to the type of AC mains plug (figures A and B).

Confirm the AC mains plug fitted and follow the instructions below. Illustrations may dif-

fer from actual AC mains plug.

Open the fuse cover with a screwdriver and replace the fuse and close or attach the fuse cover.

Fuse cover

8-E-1

EEE complies with Directive of Turkey.

EEE Yönetmeligine Uygundur.

Warning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if 

used to support vehicle related functions such as vehicle information, system control, rear or side 

observation and navigation. If the Notebook Computer is to be used for work or entertainment 

purposes, such as television reception, video play or other work programs, it must be installed in 

a position where it will NOT:

(a) be visible, directly or indirectly, to the operator of the motor vehicle; or

(b) cause distraction to drivers of other motor vehicles.

Check with individual state laws to determine lawful use of this product while operating within a motor 

vehicle. If the visual display unit is, or is part of, a driver’s aid, above rule is not applied. “Driver’s aid”  

includes closed-circuit television security cameras, dispatch systems, navigational or intelligent highway 

and vehicle system equipment, rear view screens, ticket-issuing machines and vehicle monitoring devices.

35-A-1

CPE02725ZA_FZ-G1mk1_8_7_OI_E.indb   12

2013/02/07   10:31:08