OKI ES1220n Manual De Usuario
ES 1220n Troubleshooting • 280
Print processing cancels.
Computer Interface Problems
Cannot configure for parallel connection.
Possible cause
Remedy
The printer interface
cable is faulty.
cable is faulty.
Replace the printer interface cable.
The time out setting is
too short.
too short.
Reset time out in the menu to a higher value
(
(
SYS CONFIG MENU
→
WAIT TIMEOUT
).
Possible cause
Remedy
The computer
does not support
bi-directional
parallel interface.
does not support
bi-directional
parallel interface.
There is no fix for this problem. You should only use
a computer that does support a bi-directional
parallel interface.
a computer that does support a bi-directional
parallel interface.
Parallel cable does
not meet
specifications.
not meet
specifications.
Use a bi-directional parallel cable to IEEE 1284
standard.
standard.
The interface is
disabled.
disabled.
Check that the parallel interface is set to enable in
the menu (see “Parallel Transmission Mode” on
page 276).
the menu (see “Parallel Transmission Mode” on
page 276).
Configuration
procedure was not
correctly followed
or cancelled.
procedure was not
correctly followed
or cancelled.
Configure again from the beginning.
Parallel cable is
disconnected or
faulty.
disconnected or
faulty.
Reconnect or try another cable.
A converter, buffer
or extension cable
is being used.
or extension cable
is being used.
Test by connecting printer and computer directly.