OKI PAGE 10I Manual De Usuario

10i

 User’s Guide

35

➦

   Problem Solving

MESSAGE:   USER MNT
Explanation: Maintenance Menu has been accessed.
Action:

  Press MENU button to see categories.

MESSAGE:  MENU RESET
Explanation: Menu reset option has been accessed.
Action:

  Press ENTER to reset Menus 1 & 2 to factory settings,
  or press MENU to see next category.

MESSAGE:  HEX DUMP
Explanation: Hex Dump option has been accessed.
Action:

  Press ENTER to start hex dump of received data, or
  MENU for next category. Power OFF/ ON to exit hex
  dump mode.

MESSAGE:   DRUM CNT RESET
Explanation:  Drum Counter Reset option has been accessed.
Action:

  Press ENTER to reset drum counter, or press MENU for
  next category.

MESSAGE:    OP MENU
Explanation:   Control panel Enable/ Disable category accessed.

   Change to Disable to deactivate control panel; features
   can be controlled only through software. To reset, enter
   Maintenance Menu.

   Press NEXT + to toggle enable/disable then press
   ENTER.

MESSAGE:   xxxxx

 TONER LOW

Explanation: Toner is running out. Another message can display on

  the first line.

Action:

  Replace toner cartridge when print quality deteriorates.

MESSAGE:   TONER SNS
Explanation:  A fault occurred in the toner sensor; image drum car

  tridge is not properly installed.

  Install/reinstall image drum cartridge. If not cleared,
  contact Service.

MESSAGE:   xxxxx

  CHG DRUM

Explanation:  Drum near end of life. Another message can display on

  the first line.

  Normal operations continue. Replace Image Drum
  Cartridge when print quality deteriorates.

MESSAGE:   xxxxx

  FUSER

Explanation:  Fuser near end of life. Another message can display on

  the first line.

  Normal operations continue. When print quality deterio
  rates, contact service to replace fuser.

MESSAGE:  COVER
Explanation: Cover is open.
Action:

 Close cover.