OKI C610 Manual De Usuario

Network 
Setup
(cont.)

Telnet

Enable
Disable

Sets Enable/Disable of Telnet.
Enable: Telnet is available. 

Disable: Telnet is not available. 

Display Condition:TCP/IP should 
be enabled.

FTP

Enable
Disable

Sets Enable/Disable of FTP.
Enable: FTP is available. 

Disable: FTP is not available. 

Display Condition: TCP/IP should 
be enabled.

IPSec

Enable
Disable

Sets Enable/Disable of IPSec. 
Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available.

SNMP

Enable
Disable

Sets Enable/Disable of SNMP.
Enable: SNMP is available. 

Disable: SNMP is not available. 

Display Condition: TCP/IP or 
NetWare should be enabled.

Network 
Scale

Normal
Small

When Normal is selected, the 
network can work effectively 
even when it is connected to a 
HUB that has a spanning tree 
feature. However, printer start 
up time gets longer when 
computers are connected with 
two or three small LANs.
When Small is selected, 
computers can cover from two or 
three small LANs to a large LAN, 
but may not work effectively 
when the network is connected 
to a HUB with a spanning tree 
feature.

Hub Link 
Setting

Auto 
Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half

Sets a method to link to a HUB. 
When Auto is set, a connection 
method to a HUB is selected 
automatically and attempts to 
connect. If another method is 
selected, attempts to connect to 
a HUB only by the selected 
connection method.