OKI LP440 Manual De Usuario

23

3. Slide the battery pack out of the charger. 
Notes
• If the POWER lamp does not light when you turn on the 

power, check the power cord connection.

• If the CHARGE lamp does not light at the start of charging, 

make sure the battery pack is firmly mounted into the 

charger. Poor mounting of the battery pack may result in 

faulty charging.

• When the fully charged battery pack is placed into the battery 

charger, the CHARGE lamp turns on and then off. In the case 

of the five-socket charger, the CHARGE lamp lights green.

• When charging a battery pack that has not been used for a 

long time, the CHARGE lamp may blink for a while. This does 

not indicate an error. You can continue charging.

• The battery pack can be recharged over about 300 times 

(when used at normal temperatures). If the battery pack is 

fully charged but runs out quickly, replace it with a new 

battery.

Charging Time 
It takes about 2.5 hours for a fully discharged battery pack to 

return to a fully charged state.
Charging with the Optional AC Adapter
Note: These instructions assume that the battery is installed in 

the printer (see “Installing the Battery Pack” below.