Samsung ML-2015/XEV Manual De Usuario
Samsung Electronics
Service Manual
Alignment and Adjustments
4-4
COMPONENT
REPLACEMENT CYCLE
Pick-up Roller
50,000 Pages
Transfer Roller
50,000 Pages
Fuser
50,000 Pages
Toner Cartridge
2,000 Pages(Sales), 1,000 Pages(Initial)
4.3 Consumables and Replacement Parts
The cycle period outlined below is a general guideline for maintenance.
A printer can’t transmit or receive documents this line is for fax machines.
Environmental conditions and actual use will vary these factors.
The cycle period given below is for reference only.
4.4 LED Status Error Message
ERROR
LED Status
DCU CODE
Open Fuser Error
The [Error] LED (red) and the [Toner Save] LED are simultaneously
60
flashing every one-second.
Over Heat Error
The [Error] LED (orange) and the [Toner Save] LED are
68
simultaneously flashing every one-second.
Low Heat Error
The [Error] LED (red) and the [Toner Save] LED are simultaneously
62
flashing every 4 seconds.
LSU not Ready Error
The [Error] LED (green) and the [Toner Save] LED are
95
(Pmotor Error)
simultaneously flashing every one-second.
LSU Not Ready Error
The printing is stop in the fad status, and the [Error] LED (green) and
96
(HSYNC Error)
the [Toner Save] LED are simultaneously flashing every 4 seconds.