Samsung ML-2015/XEV Manual De Usuario

Samsung Electronics

1. Before Disassembling

-Separate the font cover.(Refer to 5.2)
-Separate the SMPS cover.(Refer to 5.3)
-Separate the Main cover.(Refer to 5.4)

2. Disconnect all connectors except the connector which

connects the SMPS to the Main PBA.

3. Release 6 screws as shown as below, separate the

harnesses from the shield,and then separate the
engine shield with carefulness of the actuator feed
sensor lever. (Screw x 6:Silver_M3,6003-000196)

4. For removing only SMPS, perform the follows in order

: separate the SMPS cover (Refer to the 5.3), release
5 screws, separate the fuser connector and the main
PBA connector, and then take out the SMPS.

(Screw x 5 : Gold_M3, 6003-000269)

5. For removing only Main PBA, perform the follows in

order : separate the SMPS cover (Refer to the 5.3),
release 3 screws, separate the main PBA connector,
and then take out the main PBA.

(Screw x 3 : Gold_M3, 6003-000269)

Thermister

Clutch

Fuser

LSU

Motor

HVPS

Mirco S/W

Engine Shield
(W/Main PBA, SMPS)

Actuator Feed Sensor Lever

SMPS

Main PBA