Samsung ML-2015/XEV Manual De Usuario

Samsung Electronics

Printing begins at wrong position on the paper.

Wrong sense time caused by defective feed sensor
actuator.

Replace the defective actuator 

1. Check the Solenoid by using DCU diagnostic mode

06.

2. Check if the pad is loose due to bad sealing of the

side-pad.

3. Check the surface of the roller-pickup for foreign mat-

ter.

4. If the paper feeds into the printer rand Jam 0 occurs,

perform DCU to check feed-sensor of the engine
board.

1. Replace the solenoid. 

2. Replace the side-pad Assembly L or R, if necessary. 

3. Clean with soft cloth dampened with IPA(Isopropyl

Alcohol) or water.

4. Replace the SMPS, HVPS or Sensor.

1. Paper is not exited from the cassette.
2. Jam-0 occurs if the paper feeds into the printer.

BIN PATH