OKI ML8810n Manual De Usuario

Descargar
Página de 20
1
The Cut Sheet Feeder (CSF) option can be mounted on 
the front or the rear of the printer, but can only be 
mounted on the rear if the optional Rear Push Tractor is 
not installed.
The CSF stacker takes up to 100 sheets of 20-lb. 
(75 g/m
2
) paper.
Front View  
1  Rear Sheet Supports  
2 Paper Guides  
3  Paper Set Lever  
4  Center Guides  
5  Guide Roller  
6  Hopper Roller  
7 Stacker  
Rear View
1 Lock Levers  
2 Connecting Cable
Installation: Front Mount    
1. Unpack the cut sheet feeder. Remove the shipping 
materials.
2. Turn off the printer.
3. Prepare the printer: Open the gear cover (1) on the 
printer until it is vertical, then let it slide down into the 
housing. Slide the paper guide (2) as far to the right as 
it will go.      
4. Hold the CSF with the back facing you, and place the 
U-shaped brackets (1) at either end on the shafts (2) at 
either end of the printer sheet feed platform. Gently 
lower the CSF into place.      
F6_02.jpg
   
F6_03.jpg 
   
Front F6_04.jpg
    
Front F6_05.jpg
   
        
English
   
Cut Sheet Feeder Installation Instructions 
English   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Español  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Português  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16