OKI 5300 Plus Manual De Usuario
36
Faxing: Basic Operations
When loading multiple-page documents, do not load
paper thinner than 0.003" (0.08 mm) or thicker than
0.005" (0.13 mm). For single-page documents, do not
load paper thinner than 0.002" (0.06 mm) or thicker
than 0.006" (0.15 mm).
paper thinner than 0.003" (0.08 mm) or thicker than
0.005" (0.13 mm). For single-page documents, do not
load paper thinner than 0.002" (0.06 mm) or thicker
than 0.006" (0.15 mm).
Loading Documents
To prevent paper jams and problems during
operation, stack your documents neatly, aligning their
edges, before loading. Do not load documents of
different sizes at the same time.
operation, stack your documents neatly, aligning their
edges, before loading. Do not load documents of
different sizes at the same time.
Tip: You can load and prepare to transmit a document
while your OKIFAX is still sending or receiving another
message, as long as the document feeder is clear. To do
this, load the document, select your location and press
the Start key. Your document will be sent as a priority
when the current communication ends.
while your OKIFAX is still sending or receiving another
message, as long as the document feeder is clear. To do
this, load the document, select your location and press
the Start key. Your document will be sent as a priority
when the current communication ends.
1
Adjust the document guides to the width of the paper
you are using.
you are using.
2
Stack your documents neatly, then insert them face
down into the document feeder. Readjust the docu-
ment guides for a snug fit.
down into the document feeder. Readjust the docu-
ment guides for a snug fit.
3
Your OKIFAX will grip the documents and pull the
bottom page into the machine.
bottom page into the machine.
4
To obtain the best possible quality for the type of
document you are scanning or faxing, use the Yes
document you are scanning or faxing, use the Yes
§
key to set the resolution of your document. For most
normal documents, the default STD setting works
well.
normal documents, the default STD setting works
well.
Document Type
Resolution
Resolution
to Use
of Scan
Normal office documents
STD (Standard)
200 X 100 dpi
s
Documents with small
FINE or EX. FINE
FINE: 200 X 200 dpi
type or other fine details
EX.FINE: 200 X 400
dpi
dpi
Documents with photos
PHOTO
200 X 200 dpi
or many shades of gray